High Torque Pneumatic Air Actuator For Ball Valves , Butterfly Valves

Pneumatic Air Actuator Introduction

Pneumatic Air Actuator provide a uniform torque in a sleek case that is used both for the double acting and single acting, The Pneumatic Actuators are avaliable with a variety of accessories and various options, we supply the drives individually or directly on a fully assembled fitting. The actuators meet ISO5211/DIN3337 ,VDI/VDE 3845 for accessories,Every actuator is hydraulically tested,certified and guaranteed for a minimum of 500,000 Cycles.

Pneumatic Air Actuator Details

Epoxy coated(over 80um) die cast aluminum end caps provide maximum resistance against potentially corrosive elements. Other
treatments such as Nickel,Ceramic, PTFE,Polyester coated are available.

2 bar(29 psig) to 8 bar(116 psig) double acting
3 bar(44 psig) to 8 bar(116 psig) spring return

Std.(NBR O-rings): -20°C(-4°F) to +80°C(+176°F)
Lower Temp. (HNBR O-rings):-40°C(-40°F) to +80°C(+176°F)
High Temp. (Viton O-rings): -15°C(+5°F) to +150°C(+300°F)

The actuator range consists of 15 sizes, with torques from 8Nm(70in.ibs) to 4583Nm(65184in.lbs)at 5bar(70pisg)

Filtered dry or lubricated air for non-corrosive gas, water or lighthydraulic oil. The maximum particle size must not
exceed 30 microns.

Bottom drilling complies with ISO 5211/DIN 3337 to match valve. Interfacefor solenoid valve, shaft top end and top

drilling for assembling accessories are in accordance with VDI/VDE-3845, NAMUR standard.

Every actuator is hydraulically tested, certified and guaranteed for a minimum of 500,000 cycles.

Widely used in automatic devices, e.g. light industry, chemical industry, textile, electron,machinery, etc

Pneumatic Air Actuator Application

New type solenoid valve, unique appearance, compact structure.

Through the selection of the pressure class, suitable for different working medium.

Widely used in the field as bellow:

Pneumatic Air Actuator Construction

1, Indicator

Position indicator with NAMUR is convenient for mounting accessories such as Limit Switch box, positioner and so on.

2, Pinion

Thepinion is high-precision and integrative, made form nickelled-alloy steel, fully conform to the latest standards of ISO5211, DIN3337, NAMUR. The dimensions can be customized and the stainless steel is available.

3, Actuator Body

According to the different requirements, the extruded aluminum alloy ASTM6005
The body can be treated with hard anodized, powder polyester painted ( different
Colors are available such as blue, orange, yellow etc. ), PTFE or Nickel plated.

4, Endcaps
Die-casting aluminum powder polyester painted in different colors, PTFE or Nickel plated.

5, Pistons
The twin rack pistons are made form Die-casting aluminum treated with Hard anodized or made form Cast steel with galvanization. Symmetric mounting position, long cycle life, and fast operation, reversing rotation by simply inverting the pistons.

6, Travel adjustment
The tow independent externaltravelstop adjustment bolts can adjust± 5° At both open and close directions easily and precisely.

7, High-performance springs
Preloaded coating springs are made form the High-performance trial for resistant to corrosion and longer service life, which can be denounced safely and conveniently to satisfy different requirements of torque by changing thequantity of springs.

8, Bearings & Guides
Made from low friction, long-life compound material, to avoid the direct contact between metals. The maintenance and replacement are easy and convenient.

9, O-rings
NBR rubber O-rings provide trouble-free operation at standard temperature ranges. For high andlow temperature applications Viton or Silicone.

Pneumatic Air Actuator

Spring return actuators

1. Pistons outwards, causing the springs to compress, The pinion turns counterclockwise while air is being exhausted from port B.

2. Loss of air pressure on port A, the stored energy in the springs forces the pistons inwards. The pinion turns clockwise while air is being exhausted from port A.

3. Air to port B forces the pistons outwards, causing the springs to compress, The pinion turns counterclockwise while air is being exhausted from port B.

4. Loss of air pressure on port A, the stored energy in the springs forces the pistons inwards. The pinion turns clockwise while air is being exhausted from port A.

Welcome to Veson Valve Ltd., your premier destination for top-quality valve solutions. Our extensive product lineup boasts a variety of cutting-edge offerings designed to meet your diverse industrial needs. Among our flagship products are the VS series rack pinion rotary pneumatic actuator, VSF scotch yoke pneumatic actuator, hydraulic actuator, linear pneumatic actuator, gas-over-oil actuator, as well as a range of actuated valves and actuated butterfly valves.

With a proud history of serving the Oil Thermal and Water Supply sectors, Veson products have earned an exclusive reputation for reliability and performance. We've forged long-term partnerships with esteemed valve manufacturers, ensuring that we can deliver impeccable control valve solutions tailored to our customers' exact specifications. Our portfolio encompasses pneumatic ball valves, pneumatic butterfly valves, pneumatic and electric ball valves, regulating valves, globe valves, control valves, ESD, ESDV, SDV, and sophisticated pneumatic control systems.

Committed to excellence, Veson Valve Ltd. operates under the ISO9001:2015 certification, a testament to our unwavering dedication to quality and customer satisfaction. Our overarching goal is to establish the "VESON" brand as a symbol of unparalleled quality, offering competitive pricing and exceptional after-sales service. We extend a warm invitation to customers both domestic and international to engage with us, fostering enduring partnerships and collaborating on technical resources to enrich the pneumatic valve and expansion valve markets worldwide.

Join us on our journey to redefine industry standards and elevate the Veson experience to new heights. Let's build the future of valve technology together.